sockets
The information in the catalogue and on the website is given for reference only.
Please, ask for a sample to check.

view style:

View: 12 24 ALL

Recommended

10-300 Knock-in socket
Knock-in socket is produced in two different ways: forged (A) and stamped (B).

Forged:
- thick steel is used (1.5 mm and over),
- thread is more reliable,
- product is more accurate.

Stamped:
- thin steel is used (usually 1.0 or 1.2 mm),
- sligh deformation may occur,
- product is more budget-friendly.

Set options
Recommended

10-305 Knock-in socket

Set options
Recommended

10-351 Socket (hex inside, cap), steel

Set options
Recommended

10-357 Knock-in socket

Set options
Recommended

10-371 Plastic socket strip (open-ended)
- For thread M6.
- Hole diameter 10mm
- Sockets are linked in a strip
- The quality is mainly based on the
*thickness of the plastic,
*quality of plastic.
The weight of the recycled plastic can be higher than the primary plastic, so the weight cannot be the only factor of quality. The torque level should be taken into consideration.

Set options
Recommended

10-372 Plastic socket (open-ended)
- Hole diameter 10mm
- Sockets are not linked.
- The quality is mainly based on the
*thickness of the plastic,
*quality of plastic.
The weight of the recycled plastic can be higher than the primary plastic, so the weight cannot be the only factor of quality. The torque level should be taken into consideration.

Set options
10-301 Hexagon nut

Set options
10-303 Rectangular nut

Set options
10-304 Socket with round base

Set options
10-311 Barrel nut, cross

Set options
10-313 Barrel nut, cross, steel
- There are two types of the product:
* the hole at the centre
* the shifted hole (marked with "x" letter in item number).

Set options
10-314 Barrel nut, slot, steel
- There are two types of the product:
* the hole at the centre
* the shifted hole (marked with "x" letter in item number).

Set options