The information in the catalogue and on the website is given for reference only.
Please, ask for a sample to check.
Knock-in socket

10-300
Knock-in socket

Back

– Knock-in socket is produced in two different ways: forged (A) and stamped (B).
Forged:
*thick steel is used (1.5 mm and over),
*thread is more reliable,
*product is more accurate.

Stamped:
*thin steel is used (usually 1.0 or 1.2 mm),
*sligh deformation may occur,
*product is more budget-friendly.

Product material: steel

Product finish: zinc plated

Variations

10-300-0407-B12

M4x7

10-300-1012-A18

M10x12, T=1.8, forge

10-300-1012-A15

M10x12, forge

10-300-0810-B12D22

M8x10, T=1.2/D=22, stamp

10-300-0810-A

M8x10, forge

10-300-0610-B12

M6x10, T=1.2, stamp

10-300-0610-B10

M6x10,T=1,0, stamp

10-300-0610-A

M6x10, forge

10-300-0508-B12

M5x8

10-300-0508-A

M5x8, forge

10-300-0408-A12

M4x7.5, forge, d=~5.8

10-300-0408-A10

M4x7.5, forge, d=~5.6

10-300-1012-B12

M10x12, T=1.2, stamp